Frequently Asked Questions
The louvre installer has collated the below FAQ’S to assist you with some of those curly questions in the early planning stages of your project. For any additional information please do not hesitate calling us on – 1300 929 743 or emailing us at firstname.lastname@example.org.
Maximum Blade Width:
4 Meters (in a single bay configuration).
(Pivot = number of blades in one bay)
7 Meters with a single motor.
Please Note: One large continuous bay is achieved by adding an extra motor to each 7 meters, each time a motor is added one blade will be fixed.
The Aerotech linear blade is designed to offer the best view through the blades when the blades are in the open position, we achieve a unobstructed view through the blades due to blade being flat on each side, giving your space an clean & open feeling to the outside elements.
When the blade is closed it offers the appearance of an architectural timber paneled ceiling and not a typical colourbond type metal roof.
We have two options:
Option 1- As standard the system is fitted directly to your existing support frame; the frame requirements are as follows, the opening needs to be a minimum of 230mm in height with a flat solid internal finish so the gutters and pivot tracks can be fixed to all sides.
Option 2: As an optional extra the Aerotech System can be supplied with a powder coated structural aluminum 250mm x 50mm support frame. (and Posts if required).
Linear 215 Model: 215mm wide x 35mm thick.
Max Blade width 4000mm
Minimum Frame Height 230mm
Linear 195 Model: 195mm wide x 32mm thick.
Max Blade width 3500mm
Minimum Frame Height 200mm
The Aerotech System opens and closes automatically by premium German Made 240 Volt Electric Linear Actuator.
The Aerotech System can be simply operated by a wall switch or a remote control.
(or even from your mobile device as an optional extra).
If you choose to add the Aerotech Rain Sensor the roof will automatically close when the rain starts to ensure your area stays dry all year-round.
The Aerotech System is easily connected to your (BMS) C-Bus systems with the addition of one additional controller.
The Aerotech system is ideal for coastal locations. The Aerotech System is made utilizing non-corrosive materials including: 316 marine grade stainless steel end plates, springs and pins, hardened nylon bushes and powder coated extruded aluminum blades, gutters & pivots.
The Aerotech System is manufactured utilizing high quality materials, it is Ideal for installing in the harshest marine environments on all commercial and or high-end residential projects.
As an optional extra include a Aerotech sun-tracking device to ensure your protected from the punishing sun year-round or allow the for light ingress on those overcast days when light is needed.
Select from over 300 standard Dulux or Interpon powder colours or select a custom anodized finish to ensure your architectural requirements matched.
The Aerotech system utilizes the very highest quality German made motors, raw materials & finishes, the system will look as new and last for over a lifetime of uninterrupted and hassle free use when maintained regularly.